-
- Innovative chemical solutions
Vinyl, rubber, linoleum, wall-to-wall carpets and sports floors adhesives
EPOXIPUR ERBA
Bi-component epoxy-polyurethane adhesive for gluing sheets of synthetic grass on dedicated supports. Available in the classic green colour. Yield: 300÷900… Read more »
EPOXIPUR ERBA
Bi-component epoxy-polyurethane adhesive for gluing sheets of synthetic grass on dedicated supports. Available in the classic green colour.
Yield: 300÷900 g/sq. m
Packaging: A+B 10 kg packaging
– Bi-component adhesive
DR2020
KEM PUR
Bi-component polyurethane adhesive specially formulated for gluing coverings in rubber, PVC, linoleum, etc. Certified product: EN 12228:2003 – Surfaces for… Read more »
KEM PUR
Bi-component polyurethane adhesive specially formulated for gluing coverings in rubber, PVC, linoleum, etc. Certified product: EN 12228:2003 – Surfaces for sports areas – Determination of joint strength of synthetic surfaces” – EN 13744:2005 – Surfaces for sports areas – Procedure for accelerated ageing by immersion in hot water”.
Yield: 300÷800 g/sq. m
Packaging: A+B 10 kg packaging
– Bi-component adhesive
DR2021
ALKEM A 3
High performance adhesive, based on synthetic resins in alcoholic solution. The product can glue any sort of floor or textile… Read more »
ALKEM A 3
High performance adhesive, based on synthetic resins in alcoholic solution. The product can glue any sort of floor or textile covering of wall to wall carpet type, except those having a back in PVC or polyurethane, coco, linoleum, etc. Suitable for different types of sub-floors, even heating ones. FOR INDOOR USE ONLY.
Yield: 300÷600 g/sq. m
Packaging: 20 kg buckets
– Alcohol based, monocomponent adhesive
DR2014
ALKEM A 13
Adhesive based on synthetic resins in alcoholic solution for gluing any sort of floor or textile covering, of wall to… Read more »
ALKEM A 13
Adhesive based on synthetic resins in alcoholic solution for gluing any sort of floor or textile covering, of wall to wall carpet type, except surfaces which have a back in PVC or polyurethane, jute or felt. FOOR INDOOR USE ONLY
Yield: 250÷400 g/sq. m
Packaging: 20 kg buckets
– Alcohol based, monocomponent adhesive
DR2015
KEM ELASTIK
Bi-component epoxy-polyurethane adhesive for gluing low thickness rubber floors in squares or in sheets, indoor and outdoor, rubber sports floors,… Read more »
KEM ELASTIK
Bi-component epoxy-polyurethane adhesive for gluing low thickness rubber floors in squares or in sheets, indoor and outdoor, rubber sports floors, PVC floors, homogeneous and heterogeneous with PVC foam at the back, as well as semi-flexible vinyl floors.
Yield: 400÷900 g/sq. m
Packaging: A+B 10 kg packaging
– Bi-component adhesive
DR2017
KEM ELASTIK T
Bi-component epoxy-polyurethane thyrotrophic adhesive for gluing low thickness rubber floors in squares or in sheets, indoor and outdoor, rubber sports… Read more »
KEM ELASTIK T
Bi-component epoxy-polyurethane thyrotrophic adhesive for gluing low thickness rubber floors in squares or in sheets, indoor and outdoor, rubber sports floors, PVC floors, homogeneous and heterogeneous with PVC foam at the back, as well as semi-flexible vinyl floors
Yield: 500÷1100 g/sq. m
Packaging: A+B 10 kg packaging
– Bi-component adhesive
DR2018
KEM ELASTIK C
KEM ELASTIK conductive version. Yield: 400÷900 g/sq. m Packaging: A+B 10 kg packaging – Bi-component adhesive DR2019
KEM ELASTIK C
KEM ELASTIK conductive version.
Yield: 400÷900 g/sq. m
Packaging: A+B 10 kg packaging
– Bi-component adhesive
DR2019
ACRIL G
Monocomponent adhesive based on acrylic resins in aqueous dispersion. Suitable for gluing resilient floors on absorbent cement sub-floors, with good… Read more »
ACRIL G
Monocomponent adhesive based on acrylic resins in aqueous dispersion. Suitable for gluing resilient floors on absorbent cement sub-floors, with good initial tack. After a short wait of about 10 minutes suitable for gluing any floor and covering in PVC, rubber, linoleum, wall cladding with back in vinyl. FOR INDOOR USE ONLY.
Yield: 300÷400 g/sq. m
Packaging: 20 kg buckets
– Monocomponent adhesive
DR2010
ACRIL M
Monocomponent adhesive based on acrylic resins in aqueous dispersion. Suitable for gluing resilient floors on absorbent cement sub-floors, with good… Read more »
ACRIL M
Monocomponent adhesive based on acrylic resins in aqueous dispersion. Suitable for gluing resilient floors on absorbent cement sub-floors, with good initial tack. After a short wait of about 10 minutes can be used for the gluing of any floor and textile coverings, wall to wall carpets and yarns in general. FOR INDOOR USE ONLY.
Yield: 250÷400 g/sq. m
Packaging: 20 kg buckets
– Monocomponent adhesive
DR2011
ACRIL C
ACRIL M conductive version. Yield: 250÷400 g/sq. m. Packaging: 20 kg buckets. – Monocomponent adhesive DR2012
ACRIL C
ACRIL M conductive version.
Yield: 250÷400 g/sq. m.
Packaging: 20 kg buckets.
– Monocomponent adhesive
DR2012
Web design by Italian web agency MABE23